 |
|
 |
C-988 Auto back-sloped flat
machine for opening and
fixing tyre. |
| Rim clamping from outside |
12″—22″ |
| Rim clamping from inside |
14″—24″ |
| Maximum wheel diameter |
1200mm(47″) |
| Maximum wheel width |
410mm(16″) |
Bead-remover cylinder
(force at 10bar) |
2500Kg |
| Operating pressure |
8-10bar(145Psi) |
| Power supply |
110/220v 1ph 380v 3ph |
| Motor power |
0.75/1.1Kw |
| Noise |
＜70dB |
| Packing dimension |
1310×955×mm 1180×800×400mm |
|
 |
| C-112 Opening and fixing tyre
machine |
| Power supply |
220v-380v(50Hz) |
| Motor power |
0.75-1.1Kw |
| Bead-remover cylinder |
2500kg |
| Operating pressare |
0.8-1Mpa |
| Rim diameter |
10″-22″ |
| Rim width |
3″-12″ |
| Maximum wheel diameter |
980mm |
| Net weight |
180kg |
| Noise |
＜70dB |
|
 |
| Opening and fixing tyre machine
|
| Power supply |
220v-380v(50Hz) |
| Motor power |
0.75-1.1Kw |
| Bead-remover cylinder |
2500kg |
| Operating pressare |
0.8-1Mpa |
| Rim diameter |
10″-22″ |
| Rim width |
3″-12″ |
| Maximum wheel diameter |
980mm |
| Net weight |
180kg |
| Noise |
＜70dB |
|
 |
| C-909 Opening and fixing tyre
machine |
| Power supply |
220v-380v(50Hz) |
| Motor power |
0.75-1.1Kw |
| Bead-remover cylinder |
2500kg |
| Operating pressare |
0.8-1Mpa |
| Rim diamerer |
10″-22″ |
| Rim width |
3″-12″ |
| Maximum wheel diameter |
980mm |
| Net weight |
180kg |
| Noise |
＜70dB |
|
 |
| C-503 Opening and fixing tyre
machine |
| Power supply |
220v-380v(50Hz) |
| Motor power |
0.75-1.1Kw |
| Bead-remover cylinder |
2500kg |
| Operating pressare |
0.8-1Mpa |
| Rim diamerer |
10″-22″ |
| Rim width |
3″-12″ |
| Maximum wheel diameter |
980mm |
| Net weight |
180kg |
| Noise |
＜70dB |
|
 |
| C-505 Opening and fixing tyre
machine |
| Power supply |
220v-380v(50Hz) |
| Motor power |
0.75-1.1Kw |
| Bead-remover cylinder |
2500kg |
| Operating pressare |
0.8-1Mpa |
| Rim diamerer |
10″-22″ |
| Rim width |
3″-12″ |
| Maximum wheel diameter |
980mm |
| Net weight |
180kg |
| Noise |
＜70dB |
|
 |
| C-450D Opening and fixing
tyre machine |
| Power supply |
220v-380v(50Hz) |
| Motor power |
0.75-1.1Kw |
| Bead-remover cylinder |
2500kg |
| Operating pressare |
0.8-1Mpa |
| Rim diamerer |
10″-22″ |
| Rim width |
3″-12″ |
| Maximum wheel diameter |
980mm |
| Net weight |
180kg |
| Noise |
＜70dB |
|
 |
| Rim clamping from outside |
12″—22″ |
| Rim clamping from inside |
14″—24″ |
| Maximum wheel diameter |
1200mm(47″) |
| Maximum wheel width |
410mm(16″) |
Bead-remover cylinder
(force at 10bar) |
2500Kg |
| Operating pressure |
8-10bar(145Psi) |
| Power supply |
110/220v 1ph 380v 3ph |
| Motor power |
0.75/1.1Kw |
| Noise |
＜70dB |
| Packing dimension |
1310×955×mm 1180×800×400mm |
|
 |
能拆装各种大型车辆的多种型号轮胎。适用于带压环、压条的轮胎、子午线真空轮胎，农用机械轮胎和工程机械等轮胎。
采用本机拆装轮胎，省工、省时、省力气、工效高、不用大锤砸、且不损伤胎口和轮辋，是理想的轮胎修理、保养机械化设备。 |
| 应用范围 |
载重车/客车/拖拉机/工业用车 |
| 机长 |
1580mm |
驱动力矩 |
4250Nm |
| 机宽（最小/最大） |
1900/2060mm |
工作压力 |
130bar |
| 机高 |
760/1090mm |
夹紧力（在130bar时） |
4000公斤力 |
| 机重 |
515kg |
轮辐内孔最小直径 |
150mm |
| 夹具夹紧范围 |
14-26英寸 |
滑轨最大可滑距离 |
1214mm |
| 车轮直径/宽度 |
1500mm/780mm |
工作电源 |
3相交流/380/50Hz |
| 驱动功率 |
1.5kw |
操作电压 |
24伏 |
| 转速 |
7.34转/分钟 |
液压泵驱动功率 |
1.1Kw |
|
|
